Martindale Abrasion & Pilling Tester TF210

Martindale Abrasion & Pilling Tester TF210

Martindale Abrasion Tester, to determine the abrasion and pilling resistance of all kinds of textile structures. Martindale Test Equipment complies with ASTM D4966, ASTM D4970, ISO 12947, etc. Martindale Fabric Abrasion Tester will meet your needs when you do Martindale rub test.

Application

Martindale Abrasion and Pilling Tester, to decide the scraped spot and pilling opposition of a wide range of material structures. Tests are scoured against known abrasives at low weights and in persistently evolving ways. The measure of scraped spot or pilling is analyzed against standard parameters.

The extraordinary structure of this Martindale scraped area pilling test machine permits evacuation of individual example holders for assessment without lifting the top movement plate. It gives individual counters and stopping capacity, interim time settable and a huge touch-screen show. Standard example holders and 9 and 12kpa Weights are incorporated.

The Martindale scraped spot testing hardware is accessible with 4, 6, 8 or 9 test positions.

Specifications

Drive system is PLC, programmable control with large touch-screen
Abrasion test

• Max stroke of movement 5+/-0.5mm
• Weight of holder and spindle 200+/-1g

Pilling test

• Max stroke of movement 24+/-0.5mm
• Weight of holder and spindle 155+/-1g

Included Accessories (1 for each station)

Abrasion test (To ISO 12947-1)

• Mounting weight (2.5+/-0.5kg, for both abrasion and pilling test)
• Pilling instruments holders (Dia. 38 mm)
• Loading Weights (395+/-7g)
• Loading Weights (595+/-7g)

Pilling Test (To ISO 12945-2)

• Linear adaptor. To convert to straight-line motion.
• Sample Retaining Rings for pilling test
• Pilling test holders (Dia. 90mm)
• Loading Weights (260+/-1g)

1 Auxiliary device for specimen mounting.
1 Drawing pen
1 set of abradent fabric, wool felt, backing foam for each work station.

Optional orders

1. Specimen Cutter. (Dia. 38mm) with cutting mat.
2. Abrasive Fabric & Backing Felt Cutter. (Dia. 140mm) with cutting mat.
3. Standard Wool Abrasive Fabric SM25. 1.6M wide x 5M length – For abrasion test and pilling test (when automatic)
4. Standard Backing Foam. Width 1.5M, Length 0.5M.
5. Standard Backing Wool Felt Piece (woven) 1m x 1.5m.
6. EMPA Photographic Standards for Pilling Test (3 x 4 knitted)
7. EMPA Photographic Standards for Pilling Test (3 x 4 woven)
8. SM 50 Photographs for Pilling Test IWS + ASTM.

Weight

TF210A	110 kg
TF210B	120 kg
TF210C	120 kg
TF210D	148 kg

Power

220/110 V

50/60 Hz

Dimensions

TF210A	4 heads	920 x 760 x 630 mm (LxWxH)
TF210B	6 heads	920 x 760 x 630 mm (LxWxH)
TF210C	8 heads	920 x 760 x 630 mm (LxWxH)
TF210D	9 heads	920 x 760 x 630 mm (LxWxH)

Standards

EN ISO 12945-2	ISO 12947-1	ISO 12947-2	ISO 12947-3
ISO 12947-4	ISO 20344	ASTM D4966	ASTM D4970
BS EN 388	BS EN 530	BS 3424	BS 5690
JIS L1096	DIN 53863	DIN 53865	GB/T 13775
SATRA TM31	IS 12673	IWSTM 112	IWSTM 196
IWTO 40-88	SFS 4328	NEXT 16	GMW 15651
ISO 5470-2	M&S 17	M&S 19	M&S 19C
NEXT 18	NEXT 18a	NEXT 18b	GB/T 4802.2
GB/T 21196-1	GB/T 21196-2	Wool Mark TM 112	Wool Mark TM 196